Cabinet Accessories and Organization
Soft-close roll-outs, deep drawer inserts, and custom organizers built into the cabinet at construction, not added after.
Overview
The difference between a cabinet that works and a cabinet that frustrates is almost always in the interior accessories. A base cabinet with a pull-out shelf gives you full access to the back of the cabinet. A corner cabinet with a lazy Susan or a blind corner pull-out recovers space that would otherwise be dead storage. A deep drawer with a custom insert keeps everything in its place without the cascade of reorganizing every time you need the item at the back.
At Dan Craig Cabinetry, interior accessories are specified at the design stage and built into the cabinet at the shop, not retrofitted after installation. This means the pull-out, the organizer, and the drawer insert are sized to the cabinet opening, finished to match the interior, and mounted on soft-close slides (Blum in our custom line). The result is a cabinet interior that works as well as the exterior looks.
A shelf mounted on full-extension Blum slides inside a base cabinet. The shelf pulls out to full cabinet depth, giving complete access to the back of the cabinet without kneeling or reaching. Standard on all base cabinets in our custom cabinetry line.
A full-height drawer box with a removable peg system that creates adjustable compartments for plates, bowls, and dishes. Replaces the traditional door-and-shelf base cabinet with a drawer that brings everything to hand level.
Custom-fitted wooden drawer inserts with fixed or adjustable dividers sized to the exact drawer opening. Available in the same hardwood species as the cabinet interior for a fully coordinated look.
A narrow pull-out column, typically 6 to 9 inches wide, mounted between the cooktop and the wall or adjacent cabinet. Two or three rows of shallow shelves that keep spices visible and accessible without a dedicated drawer.
A C-shaped pull-out frame that wraps around the plumbing under the kitchen sink and provides two shallow pull-out shelves for cleaning supplies. Makes the most difficult base cabinet in the kitchen actually usable.
A drawer insert with a slotted wooden block that stores kitchen knives horizontally, blades down, in a dedicated drawer below the prep counter. Keeps knives accessible and protected without a countertop block.
Pull-outs and drawer accessories in our custom line are mounted on Blum Tandem Plus Blumotion undermount soft-close slides. Stock and semi-custom lines use each manufacturer's soft-close hardware. Ask our sales designer about the options for your line.
Yes, with limitations. A standard full-extension pull-out shelf can be retrofitted into most existing base cabinets if the interior dimensions allow for the slide hardware clearance. The result is functional but the pull-out will be sized to the existing opening rather than custom-fitted to the space.
A roll-out shelf operates behind a cabinet door and pulls out horizontally. A drawer is accessed directly without opening a door first. Both are mounted on soft-close slides; our custom line uses Blum undermount slides. The choice between a door with roll-out shelves and a full-height drawer bank is a design decision that depends on what is being stored and how the cabinet is used. We discuss both options at the design stage.
Yes. All wooden drawer inserts including peg systems, cutlery dividers, and spice inserts are designed to lift out of the drawer box for cleaning. They are not glued or fastened permanently. The peg inserts are also reconfigurable if storage needs change.
Interior accessories are designed into the cabinet at the drawing stage. Schedule a consultation and we will plan the full interior alongside the cabinet layout.
Schedule Consultation